| Confirmation Procedure |
Basic Condition:
- 12 volt battery voltage above 10 V
- IG voltage continued more than 10 V more than 5 seconds
Operating Condition:
|
| Execution |
Initial Diagnosis/Regular Diagnosis |
| Duration |
About 60 seconds |
| DTC Type |
- 1 drive cycle
- EPS indicator on
|
| Fail Safe Action |
- Continue EPS function/assist (Alternative assist or limited assist) (Continue system diagnosis: EPS function/assist will return to normal when the system returns to normal or if normalcy can receive signal via the F-CAN lines)
|
| Possible Cause |
- Open or Poor connection between the EPS control unit and the VSA modulator-control unit (F-CAN_H, F-CAN_L lines)
- VSA modulator-control unit program not the latest
- VSA modulator-control unit internal failure
- Motor/EPS control unit internal failure
|