Keyless/Power Door Locks/Security System Tripped Sensor Recall

The security system stores information on the last tripped sensor if the security system has been triggered. The information can be retrieved using the HDS.

1. Connect the HDS to the data link connector (DLC) .

2. Turn the vehicle to the ON mode.

3. Select the following menu buttons on the HDS screen in sequence, retrieve the last tripped sensor data.

Body Electrical (Security)

History Data

4. Scroll through the data list.

Sensors that were actuated will indicate the device that are set.
Sensors that were not actuated will indicate NONE.

5. Inspect the Alarm Device circuit for:

Misadjusted or damaged switch.
Loose or corroded connections.
Intermittent short to ground.

NOTE: If PANIC FRAME RECEPTION is indicated ON, inform the customer that it could have been set by something pressing the panic button on one of the registered remotes (in a pocket or purse, under a stack of papers, etc.).