Keyless Access System
NOTE:
Before troubleshooting the keyless access system, make sure the fuses associated with the system is OK.
Symptom Troubleshooting Index
| Symptom | Diagnostic procedure | Also check for |
|---|---|---|
| Cannot select ON mode with keyless access and with the keyless remote touching the power switch | Symptom troubleshooting |
|
| Cannot select ON mode with keyless access, but can select ON mode with the keyless remote touching the power switch | Symptom troubleshooting |
|
| Cannot select ON mode with the keyless remote touching the power switch, but can select ON mode with keyless access | Check the body control module |
|
| The mode changes between ACCESSORY and ON, but it does not change to OFF (LOCK) |
|
|
| The mode changes between ACCESSORY and ON, but it is difficult to change to OFF (LOCK) |
|
|
| Power switch does not work | Check for DTCs. If any DTC is indicated, go to the DTC troubleshooting |
|
| Engine does not crank (power supply is normal) |
|
|
| The engine starts, but stalls immediately | Symptom troubleshooting |
|
| Keyless access indicator does not go off or does not come on | Symptom troubleshooting |
|
| Security indicator blinks | Symptom troubleshooting |
|
| All the doors will not lock and unlock | Symptom troubleshooting |
|
| The doors will not unlock or lock with the keyless remote, but will unlock or lock with the door outer handles | Symptom troubleshooting |
|
| The doors will not unlock or lock with the door outer handle, but will unlock or lock with the keyless remote | Symptom troubleshooting |
|