Infotainment Control Unit Connector For Inputs And Outputs (2019 2020 2021)
| Connector Index |
|---|
| Infotainment Control Unit Connector A (20P) |
| Infotainment Control Unit Connector B (3P) |
| Infotainment Control Unit Connector C (5P) |
| Infotainment Control Unit Connector D (2P) |
| Infotainment Control Unit Connector E (2P) |
| Infotainment Control Unit Connector F (2P) |
| Infotainment Control Unit Connector G (12P) |
| Infotainment Control Unit Connector J (5P) (With Telematics) |
Infotainment Control Unit Connector A (20P) (female terminals)
| Cavity | Terminal Name | Description |
|---|---|---|
| A1 | GND | Ground for infotainment control unit (G404) |
| A2 | +B RADIO | Continuous power source |
| A3 | Not used | - - - |
| A4 | Not used | - - - |
| A5 | Not used | - - - |
| A6 | Not used | - - - |
| A7 | Not used | - - - |
| A8 | Not used | - - - |
| A9 | Not used | - - - |
| A10 | DISP CONT | Outputs signal for center display unit switching on/off |
| A11* | LWC SW | Detects LaneWatch on/off signal from LaneWatch switch |
| A12 | Not used | - - - |
| A13 | Not used | - - - |
| A14 | Not used | - - - |
| A15 | Not used | - - - |
| A16 | Not used | - - - |
| A17 | Not used | - - - |
| A18 | MOST ECL 1 | Inputs ECL signal |
| A19 | MOST ECL 3 | Outputs ECL signal |
| A20 | K-LINE | Detects scan tool signal (serial data) |
*: With LaneWatch
Infotainment Control Unit Connector B (3P) (female terminals)
| Cavity | Terminal Name | Description |
|---|---|---|
| B1 | LVDS+ | Communication signal for center display unit |
| B2 | LVDS- | Communication signal for center display unit |
| B3 | LVDS SH | Shield for terminals No. 1 and No. 2 |
Infotainment Control Unit Connector C (5P) (female terminals)
| Cavity | Terminal Name | Description |
|---|---|---|
| C1 | USB GND | Ground for USB port A |
| C2 | USB VBUS | Outputs power source for USB port A |
| C3 | USB DATA+ | Communication signal |
| C4 | USB DATA- | Communication signal |
| C5 | USB SH | Shield for terminals No. 1, No. 2, No. 3, and No. 4 |
Infotainment Control Unit Connector D (2P) (female terminals)
| Cavity | Terminal Name | Description |
|---|---|---|
| D1 | MOST RX+ | Inputs MOST communication signal |
| D2 | MOST RX- | Shield for terminal No. 1 |
Infotainment Control Unit Connector E (2P) (female terminals)
| Cavity | Terminal Name | Description |
|---|---|---|
| E1 | MOST TX+ | Outputs MOST communication signal |
| E2 | MOST TX- | Shield for terminal No. 1 |
Infotainment Control Unit Connector F (2P) (female terminals)
| Cavity | Terminal Name | Description |
|---|---|---|
| F1 | GPS DA | Inputs GPS signal |
| F2 | SH (GPS DA) | Shield for terminal No. 1 |
Infotainment Control Unit Connector G (12P) (female terminals)
| Cavity | Terminal Name | Description |
|---|---|---|
| G1 | RR CAM SH | Shield for terminals No. 2, No. 3, No. 4, No. 5 and No. 6 |
| G2 | RR CAM VID GND | Ground for rearview camera |
| G3 | RR CAM VCC | Power source for rearview camera |
| G4 | RR CAM VID | Inputs NTSC video signal from rearview camera |
| G5 | BIT0 | Outputs mode select signal for rearview camera |
| G6 | BIT1 | Outputs mode select signal for rearview camera |
| G7 * | LWC CAM GND | Shield for terminals No. 8, No. 9, No. 10, and No. 11 |
| G8 * | LWC CAM V GND | Ground for LaneWatch camera |
| G9 * | LWC CAM+B | Power source for LaneWatch camera |
| G10 * | LWC CAM V | Inputs video signal from LaneWatch camera |
| G11 * | LWC CAM UART | Communication signal for LaneWatch camera |
| G12 | Not used | - - - |
*: With LaneWatch
Infotainment Control Unit Connector J (5P) (female terminals) (With Telematics)
| Cavity | Terminal Name | Description |
|---|---|---|
| J1 | USB GND | Ground for USB |
| J2 | USB VBUS | Outputs power source for USB |
| J3 | USB DATA+ | Communication signal |
| J4 | USB DATA- | Communication signal |
| J5 | USB SH | Shield for terminals No. 1, No. 2, No. 3, and No. 4 |