LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 562 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Bracket Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Generator Bracket
    GM847280Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the generator bracket.
  2. Install the generator bracket bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the power steering pump. Refer to Power Steering Pump Replacement in Power Steering System.
  4. Install the generator. Refer to Generator Replacement .
    5. Fig 2: Battery Cable Junction Block Bracket Bolts
    GM759636Courtesy of GENERAL MOTORS CORP.
  5. Install the battery cable junction block bracket bolts.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

scientia non olet · About LEMON Manuals