Removal Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

Fig 1: View Of Negative Battery Cable At Battery

Courtesy of GENERAL MOTORS CORP.

Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (Single Battery) .

Fig 2: View Of Generator Cable & Nut

Courtesy of GENERAL MOTORS CORP.

Remove the generator cable from the generator, perform the following:
1. Reposition the boot to expose the stud.
2. Remove the generator cable nut.
3. Remove the generator cable from the stud.

Fig 3: View Of Battery Cables At Junction Block

Courtesy of GENERAL MOTORS CORP.

Open the positive cable junction block.
Remove the generator cable nut.
Remove the generator cable (2) from the junction block.