LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2006 >> H2 V8-6.0L >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Data Definitions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Scan Tool Data Definitions



SCAN TOOL DATA DEFINITIONS

Fob 1 Battery: The scan tool displays OK to indicate a good battery voltage level was last recieved.

Fob 2 Battery: The scan tool displays OK to indicate a good battery voltage level was last recieved.

Fob 3 Battery: The scan tool displays OK to indicate a good battery voltage level was last recieved.

Fob 4 Battery: The scan tool displays OK to indicate a good battery voltage level was last recieved.

Last Fob Button Pressed: The scan tool displays Dr. Door Unlock, All Door Unlock, Door Lock, indicating the last input received from a programmed fob.

Last Fob Used: The scan tool displays FOB 1-4 to indicate the number of the last transmitter used

Fob 1 Programmed: The scan tool displays Yes/No. The scan tool displays Yes if a transmitter is programmed to this numeric position.

Fob 2 Programmed: The scan tool displays Yes/No. The scan tool displays Yes if a transmitter is programmed to this numeric position.

Fob 3 Programmed: The scan tool displays Yes/No. The scan tool displays Yes if a transmitter is programmed to this numeric position.

Fob 4 Programmed: The scan tool displays Yes/No. The scan tool displays Yes if a transmitter is programmed to this numeric position.
scientia non olet · About LEMON Manuals