LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2006 >> H2 V8-6.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Level Sensor >> Service and Repair >> Fuel Level Sensor Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fuel Level Sensor Replacement



FUEL LEVEL SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the fuel sender.
2. Place the fuel sender on a clean work surface.
3. Disconnect the fuel level sensor electrical connector (1) from the module connector.




4. Remove the fuel level sensor retaining clip.
5. Squeeze the retaining tabs together in order to slide the fuel lever sensor off of the reservoir.

INSTALLATION PROCEDURE




1. Slide the fuel lever sensor (3) onto the reservoir until the retaining tabs snap into place.




2. Connect the fuel level sensor electrical connector (1) to the module connector.
3. Install the fuel sender.
scientia non olet · About LEMON Manuals