Installation Procedure

WARNING: This page is about a different car, the 2007 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Radio

Courtesy of GENERAL MOTORS CORP.

Align the radio with the center stack and mounting holes.

Fig 2: Electrical Connectors & Antenna Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors and the antenna connectors from the rear of the radio.

Fig 3: Radio & I/P Center Stack

Courtesy of GENERAL MOTORS CORP.

Install the bolts that hold the radio to the I/P center stack.
Align the trim panel I/P center to the I/P. Refer to Instrument Panel Center Trim Panel Replacement .
Align and move the forward center console in place with the center console bracket. Refer to Console Replacement .
Setup the new radio assembly. Refer to Control Module References .