Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Catalytic Converter-to-Exhaust Manifold Bolt/Nut - LZ4 | 31 N.m | 23 lb ft |
| Exhaust Manifold Bolt - LZ4 | 20 N.m | 15 lb ft |
| Exhaust Manifold Brace Bolt - L61 | 25 N.m | 18 lb ft |
| Exhaust Manifold Heat Shield Bolt - L61 | 23 N.m | 17 lb ft |
| Exhaust Manifold Heat Shield Bolt - LZ4 | 10 N.m | 89 lb in |
| Exhaust Manifold Nut - L61 | 14 N.m | 124 lb in |
| Exhaust Manifold Pipe-to-Muffler Nut - L61 | 30 N.m | 22 lb ft |
| Exhaust Manifold Pipe Nut - L61 | 35 N.m | 26 lb ft |
| Exhaust Pipe Heat Shield Nut | 10 N.m | 89 lb in |
| Heater Oxygen Sensor | 42 N.m | 31 lb ft |
| Heat Shield Nut | 10 N.m | 89 lb in |
| Left Catalytic Converter-to-Exhaust Manifold Nut - LZ4 | 31 N.m | 23 lb ft |
| Left Catalytic Converter-to-Right Catalytic Converter Nut - LZ4 | 31 N.m | 23 lb ft |
| Rear Catalytic Converter-to-Muffler Nut | 30 N.m | 22 lb ft |