Installation Procedure
WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the HVAC control module.
- Connect the HVAC control module electrical connectors.
- Install the HVAC control module retaining screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Install the radio. Refer to Radio Replacement .
- Install the ashtray. Refer to Ashtray Replacement .
- Refer to Control Module References for programming and setup information.
NOTE:
Refer to Fastener Notice
.