Removal Procedure

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Remove the OnStar® vehicle communication interface module (VCIM). Refer to Communication Interface Module Replacement .

Fig 1: View Of Navigation Control Processor Bracket Retaining Nuts

Courtesy of GENERAL MOTORS CORP.

Remove the nuts (1) retaining the navigation control processor bracket to the instrument panel (I/P) structure.

Fig 2: View Of Navigation Control Processor Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the bracket from the vehicle.