Generator Battery Control Module Replacement

WARNING: This page is about a different car, the 2008 Isuzu i-370, 2008 Isuzu i-290, 2008 GMC Canyon, and 2008 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Generator Battery Control Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
1	Clamp (Qty: 4) Tip: Mark the location of the clamps for installation.
2	Generator Battery Control Module Procedure Disconnect the generator battery control module harness connector. Remove the tape retaining the module to the negative battery cable and note the location for installation. Remove the module from the cable.

Callout

Component Name

Preliminary Procedure:
Remove the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .

Clamp (Qty: 4)
Tip: Mark the location of the clamps for installation.

Generator Battery Control Module

Procedure

Disconnect the generator battery control module harness connector.
Remove the tape retaining the module to the negative battery cable and note the location for installation.
Remove the module from the cable.