Circuit/System Verification
WARNING: This page is about a different car, the 2008 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, Clear the DTC. Observe the scan tool RCDLR Shift Lock Solenoid Command parameter. The parameter should change from UNLOCK to LOCK when the brake pedal is depressed and released.
- If the parameter does not change, refer to Stop Lamps Malfunction .
- Ignition ON, observe the scan tool RCDLR Shift Lock Solenoid State parameter. The parameter should change from UNLOCK to LOCK when the brake pedal is depressed and released.
- If the parameter does not change, replace the RCDLR.