Circuit/System Verification
- With the engine running, monitor the following ignition control (IC) circuit status parameters with a scan tool:
- Cylinder 1-8 IC Ckt. Short Gnd Test Status
- Cylinder 1-8 IC Ckt. Open Test Status
- Cylinder 1-8 IC Ckt. Short to Volts Test Status
- Each parameter should display OK.
- With the engine running, observe the Misfire Current counters with a scan tool.
- The counters should not be incrementing.
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.