LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2009 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Cellular System, Entertainment System, And Navigation System) >> Description and Operation >> Radio/Audio System Description and Operation >> Circuit Operation >> Amplifier Interface UQ3 (Non-GMLAN) >> Amplifier Radio Speaker Inputs
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Amplifier Radio Speaker Inputs

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The low-level audio signals (LF, RF, LR, and RR) from the radio are the inputs to the amplifier. The amplifier boosts these inputs and outputs them to the vehicle speakers. If one speaker plus or minus low level audio signal circuit is open between the radio and the amplifier, the input to the amplifier is approximately half. The speakers for that channel then operate at approximately half the normal volume or in some cases no volume.

The low level audio signals from the radio to the amplifier typically measure in the 4-5 volts range.