Component Description: OnStar®: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

OnStar® equipped (RPO UE1) vehicles use the radio amplifier and speaker system for voice communication from the OnStar® operator to the vehicle. Voice communication from the vehicle to the OnStar® operator is through the OnStar® microphone and module, which is not a part of the radio system.

When OnStar® begins operation, the radio volume is set to a preset level, auto tone preset for OnStar® becomes active and the fade control is adjusted to the full front speakers. The radio volume control can then be used to adjust the volume to a desired level.

The radio system and OnStar® system are connected through the 16-way connector at the back of the radio. Left and right channel OnStar® audio, mute control of radio functions by OnStar® and the audio signal ground are the circuits provided in the 16-way connector. Disconnecting the 16-way connector from the radio will isolate the radio system from the OnStar® system.

Voice communication from the vehicle to the OnStar® operator could be possible under this condition. However, the vehicle occupant will not be able to hear the OnStar® operator.

For more information regarding radio operation problems, refer to Symptoms - Entertainment