EBCM Programming and Setup - Non-Hybrid Less than 3900 kg (8600 lb) GVW

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: The battery must be able to maintain a charge during the programming. Only use approved Midtronics PSC-550 charger/maintainer or equivalent to maintain proper battery voltage during programming.

If the electronic brake control module (EBCM) is replaced or needs reprogrammed, the following procedure must be performed.

EBCM Reprogramming. - Refer to -Service Programming System (SPS) .