LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2010 >> H3 Alpha >> Repair and Diagnosis >> External Pages >> Different car >> Section 1780 (Programming And Setup - All Systems) >> Repair Instructions >> Control Solenoid Valve and Transmission Control Module Assembly Programming and Setup (6L45/6L50/6L80/6L90) >> TCM Reprogramming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TCM Reprogramming

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the TCM needs to be reprogrammed, refer to Service Programming System (SPS) .
  2. Perform the Reset Transmission Adapts - Refer to Reset Transmission Adapts .
    NOTE:

    After programming, perform the following to avoid future misdiagnosis:

  1. Turn the ignition OFF for 30 seconds.
  2. Turn the ignition ON with the engine OFF.
  3. Use the scan tool in order to retrieve history DTCs from all modules.
  4. Clear all history DTCs.
scientia non olet · About LEMON Manuals