Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Canyon and 2010 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Forward Curtain Clip & Air Bag Module Bolts

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution .

Install the 3 bolts (1, 3) retaining the roof rail air bag module to the roof.
Tighten: Tighten the roof rail air bag module bolts to 9 N.m (79 lb in).
Install the forward curtain clip (2).
Install the bolt retaining the bracket to the roof.

Fig 2: View Of Pillar Clips

Courtesy of GENERAL MOTORS CORP.

Install the 3 bolts retaining the rear curtain to the roof.
Tighten: Tighten the roof rail air bag curtain bolts to 9 N.m (79 lb in).

Fig 3: View Of Roof Rail Module Connector

Courtesy of GENERAL MOTORS CORP.

Install the clips (3) to the pillar.
Install the roof rail air bag forward tether bolt (3).
Tighten: Tighten the roof rail air bag forward tether bolt to 9 N.m (79 lb in).
Connect the roof rail air bag electrical connector (1).
Install the headliner. Refer to Headlining Trim Panel Replacement (Extended Cab) or Headlining Trim Panel Replacement (Regular Cab) or Headlining Trim Panel Replacement (Crew Cab) .
Enable the SIR system. Refer to SIR Disabling and Enabling .
Install the head restraints from the front seats. Refer to Driver or Passenger Seat Head Restraint Replacement .