LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 1990 >> Excel Base, 2D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Distributor >> Reassembly & Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Reassembly & Installation

  1. Coat distributor shaft with a small amount of engine oil. Assemble distributor shaft and housing. On 4-cylinder models, turn distributor shaft so flat on rotor end of shaft aligns with distributor mounting flange.
  2. On all models, assemble drive gear to distributor shaft. Align disassembly marks on distributor shaft and gear. Install NEW roll pin. To complete reassembly, reverse disassembly procedure. Ensure optical disc slots are not clogged. To install, reverse removal procedure.
Fig 1: Exploded View of Optical Distributor Assembly
G122030Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals