LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 1991 >> Excel GL, Standard >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Bench Testing >> Solenoid Tests >> Hold-In Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Hold-In Test

With solenoid "M" terminal connector still disconnected. Apply 12 volts to solenoid "S" terminal and ground starter case in order to pull-in solenoid plunger. See Fig 1. This test MUST be performed in 10 seconds or less to prevent coil burn out. If pinion drive remains out when plunger is pulled in, hold-in circuit is good. If pinion drive moves in, hold-in circuit is open, replace solenoid.

Fig 1: Solenoid Hold-In Test
G29415Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals