Scan Tool Software Update Information (Version 1.8) (98-09-004)
Publication date: 1998-04-01Reference number: 98-09-004
SCAN TOOL SOFTWARE UPDATE INFORMATION (VERSION 1.8)
TECHNICAL SERVICE BULLETIN
Reference Number(s): 98-09-004, Date of Issue:
April, 1998
SCAN TOOL SOFTWARE UPDATE INFORMATION (VERSION 1.8)
Model(s): Hyundai, All Models
Group: Special Service Tools
Bulletin No.: 98-09-004
Date: April, 1998
DESCRIPTION
This TSB describes the 1998 Scan Tool Software Package (V1.8) along with the following additional information to assist with Scan Tool operation:
- Helpful Notes and Tips for Scan Tool "No Communication"
- Using the Evaporative Emission System Trigger Test
- Scan Tool part numbers
- Scan Tool warranty labor operation codes
1998 SCAN TOOL SOFTWARE UPDATE (V1.8)
The new 1998 Scan Tool software update contains the following improvements and additions:
- 1998 vehicle database
- Evap system trigger for 1997 vehicles for use with Hyundai Diagnostic System (HDS) (this will save the Technician from waiting for the 15 minute pre-cycle time). Complete instructions are shown below.
- Updated diagnostic code (DTC) descriptions for easier understanding.
- Data display uses "Custom Data" menu only. (Encourages Technician to select only the relevant component data to be displayed, resulting in improved data refresh rates.)
- Removed "Connect OBDII Connector..." message for faster performance.
- Improved accuracy of data readings.
- Checks for proper GCI chip. (The GCI chip is the other chip on the cartridge circuit board that must be at version 1.1. Communication errors would occur if the proper GCI chip is not installed.)
NOTES AND TIPS FOR USING THE SCAN TOOL
- If a "No Communication" message is displayed on the HDS Scan Tool when trying to view codes or data, check/try the following items:
- Check for correct Vehicle Identification Number (VIN). Be careful when entering a 1997 or 1998 VIN and answer the "Tiburon?" question correctly.
- Clean the contacts of the K5A Personality Key with Hyundai Multi-Purpose Cleaner & Degreaser or another suitable contact cleaner. A film or residue from the shop environment may form on the Personality Key contacts causing poor circuit connection. Results may be erratic communication or no communication at all.NOTE: Many SRS system communication conditions are solved by cleaning the K5A Personality Key However, if cleaning the K5A Personality Key contacts does not work, a replacement key may be necessary. Call Kent-Moore at 1-800-345-2233 to order a new K5A key (P/N J-41490-K5A).
- SRS communication conditions can occur when the main SRS fuse is blown. The SRS light may be on, however, the module does not have power and cannot communicate with the Scan Tool.
- Secure data link connection - Check OBD-II adapter and vehicle data link connector pins for damage. (Tweaking of OBD-II adapter pins approximately 10 degrees may help.)
- Turn the ignition key OFF and back ON. This re-sets the Powertrain Control Module (PCM) communication system.
- In some cases, for older model vehicles (pre-1996), it may be necessary to attempt communication by selecting one year above or one year below the model year being worked on as the software in the Scan Tool can only accommodate one communication setting per model configuration.
- Re-enter the VIN and make sure the key is in the ON position and not the ACC position.
- Codes should only be cleared with the ignition in the ON position. If the engine is running, the codes may not be cleared properly.
- If the plastic cartridge housing is cracked or damaged, an empty replacement plastic cartridge (P/N J-41490-16) (includes the label) can be ordered through Kent-Moore. More information and Scan Tool part numbers are shown below.
- A new Scan Tool adapter is available that contains an extra plastic strip to allow a more secure connection to the data link connector. See Fig 1 .
USING THE EVAPORATIVE EMISSION SYSTEM TRIGGER TEST
The Evaporative Emission System Trigger Test works best in combination with HDS and is found in the "Select Systems" menu on the Scan Tool.
- Set up the HDS as you normally would to monitor the EVAP System by selecting from the "Signal Waveforms" screen the Canister Close Valve, the Canister Purge Valve and the Differential Pressure Sensor (DPS). Set the MS/DIV (millisecond/division) to 300.
- Make sure the vehicle is running at normal operating temperature, there are no codes present (clear any code before performing test) and the oxygen sensor is active.
- If all conditions are met, start the Evaporative Emission Test and the Scan Tool will display "Now Trying to Trigger EVAP Test". After a few seconds "Start Recording on the HDS System" message will display. At this point click the RUN button on HDS to start recording.
- About 30 seconds later the message "Wait about 10 seconds then stop recording on the HDS System" will be displayed. After 10 seconds, stop the recording on the HDS. The HDS should have captured the Evaporative Emission System cycle. If the EVAP Test did not perform as described above, disconnect and then re-connect the scan-tool before attempting to perform the EVAP Test again.
NOTE:
I) After performing the EVAP Test, it may be necessary to cycle the key off and back on to view engine codes and data. This resets the powertrain control module (PCM) communication system. II) The EVAP Test can only be performed twice during one key on cycle. Turn the engine off and wait about 15 seconds before trying to run the test again.
SCAN TOOL PART NUMBERS
The following is a list of replacement part numbers for the HDS scan tool. To order any of the items listed blow, contact Kent-Moore at 1-800-345-2233.
SCAN TOOL PART NUMBERS
| Part Number | Description |
|---|---|
| J-41490-C | Hyundai Scan Tool (complete with all items listed below) |
| J-41490-1 | Scan-tool Unit - See Fig 2 . |
| J-41490-3 | Expansion Slot Cover - See Fig 3 . |
| J-41490-5 | Data Cable - See Fig 4 . |
| J-41490-6 | Cigarette Lighter Power Cable - See Fig 5 . |
| J-41490-7 | Battery Power Cable - See Fig 6 . |
| J-41490-8 | VT100 Data Cable - See Fig 7 . |
| J-41490-9 | Carrying Case |
| J-41490-10 | Hyundai-2 Adapter (for use with pre-OBD-II models) - See Fig 8 . |
| J-41490-12 | OBD-II Adapter (Upgraded model) - See Fig 9 . |
| J-41490-13 | VT100 HDS Adapter - See Fig 10 . |
| J-41490-K5A | Personality Key (KSA) - See Fig 11 . |
| J-41490-15A | Software Cartridge (includes V1.8 update - See Fig 12 . |
| J-41490-16 | Empty Replacement Plastic Cartridge (includes only J-41490-15A label) - See Fig 13 . |
| J-41490-98 | Software cartridge Update Kit (kit includes update chip, label and instructions) - See Fig 14 . |
| J-41490-INST | Snap On Instruction Manual |
| NP150-07003 | Hyundai Instruction Manual Insert - See Fig 15 . |
| NP435-00010 | Hyundai Scan Tool Binder (empty) - See Fig 16 . |
SCAN TOOL WARRANTY LABOR OPERATION CODES
NOTE:
Check the Labor Time Standard (LTS) for applicable model and year.
SCAN TOOL WARRANTY LABOR OPERATION CODES
| Operation Code | Operation |
|---|---|
| 95840RP0 | A/T SOLENOID ADD SCAN TOOL OPERATION |
| 95660RP0 | ABS CONTROL UNIT ADD SCAN TOOL OPERATION |
| 39360RP0 | ACCELERATION SENSOR ADD SCAN TOOL OPERATION |
| 95910RP0 | AIR BAG CONTROL MODULE ADD SCAN TOOL OPERATION |
| 91701RP0 | AIR BAG WIRING HARNESS ADD SCAN TOOL OPERATION |
| 28164RP0 | AIR FLOW SENSOR ADD SCAN TOOL OPERATION |
| 28162RP0 | AIR TEMPERATURE SENSOR ADD SCAN TOOL OPERATION |
| 95440RP0 | AUTO T/M CONTROL UNIT ADD SCAN TOOL OPERATION |
| 93840RP0 | AUTO T/M SWITCH ADD SCAN TOOL OPERATION |
| 37110RP0 | BATTERY ASSEMBLY ADD SCAN TOOL OPERATION |
| 39350RP0 | CAMSHAFT POSITION SENSOR ADD SCAN TOOL OPERATION |
| 31420RP0 | CANISTER ASSY ADD SCAN TOOL |
| 31430RP0 | CANISTER CLOSE VALVE ADD SCAN TOOL |
| 28950RP0 | CATALYTIC CONVERTER ADD SCAN TOOL |
| 31190RP0 | CHECK VALVE ASSY ADD SCAN TOOL |
| 93490RP0 | CLOCK SPRING ASSY ADD SCAN TOOL |
| 39110RP0 | COMPUTER ASSEMBLY ADD SCAN TOOL OPERATION |
| 39160RP0 | CONTROL RELAY ADD SCAN TOOL OPERATION |
| 39180RP0 | CONTROL RELAY ADD SCAN TOOL OPERATION |
| 39310RP0 | CRANK ANGLE SENSOR ADD SCAN TOOL OPERATION |
| 39181RP0 | CRANKSHAFT POSITION SENSOR ADD SCAN TOOL OPERATION |
| 27100RP0 | DISTRIBUTOR ASSEMBLY ADD SCAN TOOL OPERATION |
| 56910RP0 | DRIVE AIR BAG ADD SCAN TOOL OPERATION |
| 93240RP0 | E.C.T. SWITCH ADD SCAN TOOL OPERATION |
| 39465RP0 | E.G.R. SOLENOID VALVE ADD SCAN TOOL OPERATION |
| 28470RP0 | E.G.R. VALVE ADD SCAN TOOL OPERATION |
| 35105RP0 | FAST IDLE AIR KIT ADD SCAN TOOL OPERATION |
| 31156RP0 | FILL VENT VALVE - ADD SCAN TOOL |
| 31036RP0 | FILLER HOSE ADD SCAN TOOL |
| 31030RP0 | FILLER NECK & FUEL HOSE ASSY ADD SCAN TOOL |
| 95670RP0 | FRONT WHEEL SPEED SENSOR ADD SCAN TOOL OPERATION |
| 31144RP0 | FUEL HIGH PRESSURE HOSE ADD SCAN TOOL |
| 17911RP0 | FUEL HOSE ADD SCAN TOOL |
| 35310RP0 | FUEL INJECTOR ADD SCAN TOOL OPERATION |
| 31435RP0 | FUEL PRESSURE SENSOR ADD SCAN TOOL OPERATION |
| 31110RP0 | FUEL PUMP ADD SCAN TOOL OPERATION |
| 31140RP0 | FUEL PUMP GASKET ADD SCAN TOOL |
| 31050RP0 | FUEL SEPARATOR ASSEMBLY ADD SCAN TOOL |
| 31150RP0 | FUEL TANK ASSY ADD SCAN TOOL |
| 31010RP0 | FUEL TANK CAP ASSY ADD SCAN TOOL |
| 31341RP0 | FUEL VAPOR TUBE (FRONT) ADD SCAN TOOL |
| 31342RP0 | FUEL VAPOR TUBE (REAR) ADD SCAN TOOL |
| 31340RP0 | FUEL VAPOR TUBE ADD SCAN TOOL |
| 31347RP0 | FUEL VAPOR TUBE HOSE ADD SCAN TOOL |
| 28921RP0 | HOSE VAPOR ADD SCAN TOOL |
| 28924RP0 | HOSE VAPOR ADD SCAN TOOL |
| 31348RP0 | HOSE VAPOR ADD SCAN TOOL |
| 58910RP0 | HYDRAULIC UNIT (ABS) ADD SCAN TOOL OPERATION |
| 35104RP0 | I.S.C. SERVO KIT ADD SCAN TOOL OPERATION |
| 35150RP0 | IDLE SPEED ACTUATOR ADD SCAN TOOL OPERATION |
| 35130RP0 | IDLE SWITCH KIT ADD SCAN TOOL OPERATION |
| 27301RP0 | IGNITION COIL ADD SCAN TOOL OPERATION |
| 45900RP0 | INHIBITOR SWITCH ADD SCAN TOOL OPERATION |
| 45411RP0 | KICK DOWN DRUM ADD SCAN TOOL OPERATION |
| 45691RP0 | KICK DOWN SERVO SWITCH ADD SCAN TOOL OPERATION |
| 39250RP0 | KNOCK SENSOR ADD SCAN TOOL OPERATION |
| 31186RP0 | LEVELING PIPE HOSE ADD SCAN TOOL |
| 39300RP0 | MDP - SENSOR ADD SCAN TOOL |
| 46386RP0 | OIL TEMPERATURE SENSOR ADD SCAN TOOL OPERATION |
| 31060RP0 | ONE WAY VALVE ADD SCAN TOOL |
| 93820RP0 | OVER DRIVE SWITCH ADD SCAN TOOL OPERATION |
| 39210RP0 | OXYGEN SENSOR ADD SCAN TOOL OPERATION |
| 56920RP0 | PASSENGER AIR BAG ADD SCAN TOOL OPERATION |
| 28922RP0 | PIPE VAPOR ADD SCAN TOOL |
| 27360RP0 | POWER TRANSISTOR ADD SCAN TOOL OPERATION |
| 94367RP0 | PRINTED CIRCUIT BOARD ADD SCAN TOOL |
| 45644RP0 | PULSE GENERATOR ADD SCAN TOOL OPERATION |
| 28910RP0 | PURGE CONTROL VALVE ADD SCAN TOOL |
| 39466RP0 | PURGE CONTROL VALVE ADD SCAN TOOL OPERATION |
| 39211RP0 | REAR OXYGEN SENSOR ADD SCAN TOOL OPERATION |
| 95680RP0 | REAR WHEEL SPEED SENSOR ADD SCAN TOOL OPERATION |
| 94216RP0 | REED SWITCH ADD SCAN TOOL OPERATION |
| 45000RP0 | SCAN TOOL & AUTOMATIC TRANSAXLE TESTER |
| 39270RP0 | SENSOR ASSY BOOST ADD SCAN TOOL OPERATION |
| 45775RP0 | SOLENOID VALVE ADD SCAN TOOL OPERATION |
| 94210RP0 | SPEEDOMETER ASSY ADD SCAN TOOL |
| 94240RP0 | SPEEDOMETER CABLE ADD SCAN TOOL |
| 94220RP0 | TACHOMETER ADD SCAN TOOL |
| 35100RP0 | THROTTLE BODY ASSEMBLY ADD SCAN TOOL OPERATION |
| 35102RP0 | THROTTLE POSITION SENSOR ADD SCAN TOOL OPERATION |
| 91760RP0 | T-M CONTROL WIRING ADD SCAN TOOL |
| 31135RP0 | TWO WAY VALVE ASSY ADD SCAN TOOL |
| 31371RP0 | VACUUM TUBE ADD SCAN TOOL |
| 45600RP0 | VALVE BODY ADD SCAN TOOL OPERATION |
| 31067RP0 | VAPOR HOSE ADD SCAN TOOL |
| 31175RP0 | VAPOR HOSE ADD SCAN TOOL |
| 39450RP0 | WASTE GATE CONTROL VALVE ADD SCAN TOOL OPERATION |
| 39220RP0 | WATER TEMP SENSOR ADD SCAN TOOL OPERATION |