Connecting Rod, Engine

Crankshaft, inch:
Standard Journal Diameter:
Main Bearing 2.3614-2.3622
Crank Pin 1.9677-1.9685
Out Of Round, All 0.0012
Taper, All 0.0002

Bearing Clearance, inch:
Main Bearings 0.0008-0.0019
Connecting Rod Bearings 0.0006-0.0018
Thrust Bearing Clearance 0.0020-0.0098

Connecting Rods Side Clearance, inch 0.0039-0.0098