Rear Wheel Alignment

REAR WHEEL ALIGNMENT INSPECTION
Toe-in
Standard value: 4 +3/-1 mm (0.16 +0.12/-0.04 inch)





NOTE: The rear suspension (T) mounting bolt should be turned an equal amount on both sides when adjusting. Loosen the rearside nut prior to adjusting the eccentric bolt.

Left wheel: Clockwise direction: toe-in
Right wheel: Clockwise direction: toe-out
The scale has gradations of approximately 2.4 mm (0.09 inch) (Single side toe angle equivalent to 14')





CAUTION: The eccentric bolt should be adjusted within a 90° range left and right from the center position.