LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2002 >> Accent L >> Repair and Diagnosis >> Electrical >> Starters >> Bench Testing >> Solenoid Tests >> Hold-In Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Hold-In Test

Disconnect field coil wire from terminal "M" of solenoid. Apply battery voltage to terminal "S" of solenoid, and ground starter case. See Fig 1 . Solenoid plunger should pull in. If pinion drive remains out when plunger is pulled in, hold-in circuit is good. If pinion drive moves in or moves back and forth repeatedly, hold-in circuit is open. Replace solenoid.

Fig 1: Solenoid Hold-In Test
G96F06212Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals