LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2002 >> XG350 Base >> Repair and Diagnosis (Single Page) >> Electrical >> Starters >> Bench Testing >> Solenoid Tests >> Pull-In Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Pull-In Test

  1. Disconnect field coil wire from terminal "M" of solenoid.
  2. Connect 12-volt battery between terminals "S" and "M" of solenoid. See Fig 1 .
  3. Solenoid plunger should pull in, extending pinion drive. If pinion drive moves outward, pull-in coil is good. If pinion drive does not move outward, replace solenoid.
Fig 1: Solenoid Pull-In Test
G96D06211Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals