LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2003 >> Elantra GLS, Standard >> Repair and Diagnosis >> Electrical >> Starters >> Bench Testing >> Solenoid Tests >> Pull-In Test
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Pull-In Test

Disconnect field coil wire from starter solenoid terminal "M". Connect 12 volt battery between starter solenoid terminals "S" and "M". See Fig 1 . Solenoid plunger should pull in, extending pinion drive. If pinion drive moves outward, pull-in coil is good. If pinion drive does not move outward, replace solenoid. See OVERHAUL  .

Fig 1: Solenoid Pull-In Test
G96D06211Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals