LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2004 >> Tiburon Base, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Electronic Time And Alarm Control System (ETACS) >> ETACS (Electronic Time And Alarm Control System) >> Transmitter >> Programming Transmitter Code
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Programming Transmitter Code

  1. To program the transmitter code, first connect the hi-scan (pro) to the Data Link Connector (DLC) in drive side crash pad lower panel.
    Fig 1: Programming Transmitter Code
    G01992638Courtesy of HYUNDAI MOTOR CO.
  2. Turn the power on hi-scan (pro) with the ignition switch ON.
  3. Select the vehicle model on hi-scan (pro).
  4. After selecting "CODE SAVING" menu then button "ENTER" key.
  5. Proceed as follow steps and then code saving is completed.
    1. Press [ENTER] key, if you are ready.
    2. Press the transmitter [LOCK] button above 1 second.
    3. If you save transmitter one more, press other transmitter [LOCK] button above 1 second.
    4. Turn the hi-scan (pro) off, and check the keyless entry system.
scientia non olet · About LEMON Manuals