LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2007 >> Azera GLS >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine (G6DB/G6DA-GSL 3.3/3.8) >> Engine Block >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Block: Removal

CAUTION:
  • Use fender covers to avoid damaging painted surfaces.
  • To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
NOTE:
  • Mark all wiring and hoses to avoid misconnection.
  • Inspection the timing belt before removing the cylinder head.
  • Turn the crankshaft pulley so that the No.1 piston is at top dead center. (Refer to VALVE CLEARANCE INSPECTION AND ADJUSTMENT  )
  • Engine removal is required for this procedure.
  1. Remove exhaust manifold. (Refer to EXHAUST MANIFOLD  )
  2. Remove intake manifold. (Refer to INTAKE MANIFOLD  )
  3. Remove timing chain. (Refer to REMOVAL  )
  4. Remove water temperature control assembly. (Refer to REMOVAL  )
  5. Remove cylinder head. (Refer to REMOVAL  )
  6. Remove oil pump. (Refer to REMOVAL  )
  7. Remove oil filter assembly. (Refer to REMOVAL  )
  8. Remove A/C compressor (A) from engine.
    Fig 1: Identifying A/C Compressor
    G04879471Courtesy of HYUNDAI MOTOR CO.
  9. Remove alternator (A) from engine.
    Fig 2: Identifying Alternator
    G04879472Courtesy of HYUNDAI MOTOR CO.
  10. Remove power steering pump (A) from engine.
    Fig 3: Identifying Power Steering Pump
    G04879470Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals