LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2007 >> Azera GLS >> Repair and Diagnosis >> General Information >> Steering >> General (Steering System) >> Service Adjustment Procedure >> Checking Power Steering Fluid Level
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Checking Power Steering Fluid Level

  1. Position the vehicle on a level surface.
  2. Start the engine. With the vehicle kept stationary, turn the steering wheel several times continuously to raise the fluid temperature to 50-60°C (122-140°F).
  3. With the engine at idle, turn the steering wheel fully clockwise and counter-clockwise several times.
  4. Make sure that there is no foaming or cloudiness in the reservoir fluid.
  5. Stop the engine and check for any difference in fluid level between a stationary and a running engine.
    NOTE:
    1. If the fluid level varies 5 mm (0.2 in) or more, bleed the system again.
    2. If the fluid level suddenly rises after stopping the engine, further bleeding is required.
    3. Incomplete bleeding will produce a chattering sound in the pump and noise in the flow control valve, and lead to decreased durability of the pump.
      Fig 1: Identifying Power Steering Fluid Reservoir
      G04880519Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals