Spark Test

Remove the ignition coil connector(A).

Fig 1: Identifying Ignition Coil Connectors And Ignition Coils
Courtesy of HYUNDAI MOTOR CO.

NOTE: When removing the ignition coil connector, pull the lock pin(A) and push the clip(B).

Fig 2: Pulling Lock Pin And Push Clip
Courtesy of HYUNDAI MOTOR CO.
Remove the ignition coil(B).
Using a spark plug socket, remove the spark plug.
Install the spark plug to the ignition coil.
Ground the spark plug to the engine.

Fig 3: Grounding Spark Plug To Engine
Courtesy of HYUNDAI MOTOR CO.
Check if spark occurs while engine is being cranked.
NOTE: To prevent fuel being injected from injectors while the engine is being cranked, remove the fuel pump relay(A) from the fuse box.
Crank the engine for no more than 5 ~ 10 seconds.

Fig 4: Identifying Fuel Pump Relay
Courtesy of HYUNDAI MOTOR CO.
Inspect all the spark plugs.
Using a spark plug socket, install the spark plug.
Install the ignition coil.
Reconnect the ignition coil connector.

Fig 5: Spark Test Flow Chart
Courtesy of HYUNDAI MOTOR CO.