Fuel Tank: Removal

Preparation
1. Open the Service Cover (A) by unscrewing the bolts (B).
  
  Fig 1: Identifying Service Cover And Bolts
  Courtesy of HYUNDAI MOTOR CO.
2. Disconnect the Fuel Pump Connector (A).
  
  Fig 2: Disconnecting Fuel Pump Connector
  Courtesy of HYUNDAI MOTOR CO.
3. Start the engine and wait until fuel in fuel line is exhausted.
4. After the engine stalls, turn the ignition switch to OFF position.
Disconnect the Fuel Feed Line (A) and Fuel Tank Pressure Sensor connector (B).

Fig 3: Disconnecting Fuel Feed Line And Fuel Tank Pressure Sensor Connector
Courtesy of HYUNDAI MOTOR CO.
Lift the vehicle and support the fuel tank with a jack.
Remove the main and center muffler (Refer to INTAKE AND EXHAUST SYSTEM ).
Disconnect the Fuel Filler Hose (A) and Recirculation Line (B).

Fig 4: Disconnecting Fuel Filler Hose And Recirculation Line
Courtesy of HYUNDAI MOTOR CO.
Disconnect the Canister Hose (A) from the Canister (B).

Fig 5: Disconnecting Canister Hose From Canister
Courtesy of HYUNDAI MOTOR CO.
Remove the fuel tank band mounting bolts (2), and then remove the Fuel Tank from the vehicle.