LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2009 >> Accent GLS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> P0630 VIN Not Programmed or Incompatible-ECM/PCM >> Monitor Scantool Data
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Monitor Scantool Data

  1. Ignition "OFF"
  2. Connect Scantool and Ignition "ON"
  3. Monitor the ECM/PCM status using the VIN READING function.
  4. Is the ECM/PCM status Virgin?

    YES 

    NO 

    • Fault is intermittent caused by poor contact in Sensor's and/or PCM's connector or was repaired and ECM/PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure
scientia non olet · About LEMON Manuals