LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2009 >> Elantra GLS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures >> DTC P0111 Intake Air Temperature Sensor1 Circuit Range/Performance >> DTC Detecting Condition
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

DTC P0111 Intake Air Temperature Sensor1 Circuit Range/Performance: DTC Detecting Condition

DTC P0111 DETECTING CONDITION TABLE

Item Detecting Condition Possible Cause
DTC Strategy
  • Check intake air temperature signal stuck.
  • Contact resistance in connections.
  • Faulty IAT sensor
Enable Conditions
  • Time after engine start > 400sec.
  • Time in idle depending on intake air temp, after start > 15sec. at20°C (68°F) (35sec. at 10°C (50°F))
  • Coolant temp. > 74°C (165.2°F)
  • Coolant temp, increasing after start > 40°C (104°F)
  • Accumulated time for vehicle speed > 70km/h (44mph) for more than 100sec.
  • No relevant failure
Threshold Value
  • Depends on Intake Air Start Temperature
Diagnostic Time
  • 5 sec
MIL On Condition
  • 2 Driving Cycles