October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Control Circuit Inspection

Measure voltage between terminal 6 of the CCV harness connector and chassis ground
Specification: Approx. 4~5V

Fig 1: Measuring Voltage Between Terminal 6 Of CCV Harness Connector And Chassis Ground
Courtesy of HYUNDAI MOTOR CO.
Is voltage within the specification?
YES
- Go to TERMINAL AND CONNECTOR INSPECTION
NO
- Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure