LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2009 >> Elantra SE, Standard >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures >> DTC P0196 Engine Oil Temp. Sensor Range/Performance >> Monitor SCANTOOL Data
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Monitor SCANTOOL Data

  1. Allow the engine to cool.
  2. Run the cold engine at idle for 5 minutes.
  3. Check the engine coolant temperature parameter at idle with the scantool.
  4. Is the engine coolant temperature increase to above 50°C (122°F)
    Fig 1: Scan Tool Display - Engine Coolant Temperature
    G05363820Courtesy of HYUNDAI MOTOR CO.

    YES 

    NO 

    • Check ECTS for contamination, deterioration, poor connection or damaged harness. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure
scientia non olet · About LEMON Manuals