LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2009 >> Elantra SE, Standard >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures >> DTC P2270 O2 Sensor Signal Stuck Lean (Bank 1/Sensor 2) >> Signal Waveform And Data
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Signal Waveform And Data

DTC P2270 SIGNAL WAVEFORM AND DATA

Test Condition Scan Tool Parameter
O2 SNSR VOL.-B1/S1 O2 SNSR VOL.-B1/S2
Normal Value when circuit is normal Idle after warm up Signal is switching from rich (above 0.45V) to lean (below 0.45V) a minimum of 3 times in 10 seconds. Above 0.7V
HO2S (B1S1) signal circuit open Approx. 0.43~0.45V -
HO2S (B1S2) signal circuit open - Approx. 0.43~0.45V
Fig 1: HO2S Signal Waveform With Idle After Warm Up
G05363816Courtesy of HYUNDAI MOTOR CO.