P0130 O2 Sensor Circuit (Bank 1/Sensor 1): DTC Detecting Condition

Item		Detecting Condition	Possible Cause
DTC Strategy		Voltage range check	Open in signal harness Open in ground harness Contact resistance in connectors Faulty Heated O2 Sensor (HO2S)
Enable Conditions		Sensor preheating and full heating phases finished Modeled exhaust gas temp, > 600°C (1112°F) Lambda control active No relevant failure Battery voltage > 10V
Threshold Value	Case 1)	Lambda control not active within the defined time
Threshold Value	Case 2)	0,49V > Down HO2S > 0,37V and sensor element resistance > 60 kΩ
Diagnostic Time	Case 1)	30 ~ 100 sec. depending on start temp.
Diagnostic Time	Case 2)	10 sec.
Mil On Condition		2 Driving Cycles