P0132 O2 Sensor Circuit High Input (Bank 1/Sensor 1): DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Sensor voltage high	Short to battery in signal harness Contact resistance in connectors. Faulty Heated O2 Sensor (HO2S)
Enable Conditions	No relevant failure 10V ≤ Battery voltage ≤ 16V
Threshold Value	Sensor voltage > 1.3V
Diagnostic Time	1 Sec.
Fail Safe	Reset lambda adaptation and fuel trim adaptation. Front HO2S heater is controlled in open loop control. EVAP. Emission control function is controlled in minimum operation mode.
Mil On Condition	2 Driving Cycles