LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2010 >> Genesis 3.8 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> DTCS With Programmable Interface Controller (Pic) >> P1692 Immobilizer Indicator Lamp Error >> Visual/Physical Inspection >> Check immobilizer lamp circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check immobilizer lamp circuit

  1. Ignition "ON" & Engine "OFF"
  2. Check if immobilizer lamp operates properly.
    NOTE: Right after ignition "ON", Immobilizer lamp lights up for 30sec.
    If lamp blinks 5 times after ignition "ON", a fault exists in immobilizer system.
  3. Is immobilizer lamp operates properly?

    YES 

    • Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals