DTC P0667: PCM/ECM/TCM Internal Temperature Sensor Range/Performance: DTC Detecting Condition

P0667 PCM/ECM/TCM INTERNAL TEMPERATURE SENSOR RANGE/PERFORMANCE

Item	Detecting Condition	Possible Cause
DTC Strategy	Check signal range	Faulty in Mechatronics (Valve-body + TCM)
Enable Conditions	"IG KEY" ON
Threshold Value	Output value of Temperature sensor out of normal range Output value of Temperature sensor not changed for long term
Diagnostic Time	1.5 second
Fail Safe	- (priority: 2)

CAUTION:

The function with the higher priority will always take precedence. However, a low-priority is not overruled by a higher priority function.
Functions from different priority categories can also run in parallel. It is important to note which function will take precedence in this case.
In such an event it is possible for a substitute function with low priority not be carried out if a second, higher-priority function is present. This has been taken into account when compiling the priority list and is international.
The mechanical emergency run function must always have the highest priority, since from the electrical standpoint it is the only safe condition.