LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2010 >> Santa Fe GLS, 2.4 B, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Knock Sensor (KS) >> Repair procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Drain the engine coolant. (Refer to COOLING SYSTEM .)
  3. Remove the radiator upper hose. (Refer to COOLING SYSTEM .)
  4. Disconnect the knock sensor connector (A).
    Fig 1: Identifying Knock Sensor Connector
    G06846849Courtesy of HYUNDAI MOTOR CO.
  5. Remove the intake manifold. (Refer to INTAKE AND EXHAUST SYSTEM .)
  6. Remove the installation bolt (A), and then remove the sensor from the cylinder block.
    Fig 2: Identifying Knock Sensor Installation Bolt
    G06846850Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals