Power Supply Circuit Inspection

Check for open or short in power harness
1. Ignition "OFF".
2. Measure voltage value between terminal "4" of Multifunction switch and chassis ground.
  Specification: Approx. 12V
  
  Fig 1: Measuring Voltage Value Between Terminal 4 Of Multifunction Switch And Chassis Ground
  Courtesy of HYUNDAI MOTOR CO.
3. Is the measured voltage within specifications?
  YES
  - Go to "COMPONENT INSPECTION " procedure.
  NO
  - Check for open or short in power harness. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.