LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2011 >> Equus Signature >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System Components >> Rear Wheel Speed Sensor >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

  1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.
    CAUTION: In order to protect the wheel speed sensor, when measuring output voltage, a 100 Ω resister must be used as shown.
    Fig 1: Measuring Output Voltage Between Terminal Of Wheel Speed Sensor And Body Ground
    G07312242Courtesy of HYUNDAI MOTOR CO.
  2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.
    Fig 2: Voltage Time Graph
    G07312243Courtesy of HYUNDAI MOTOR CO.

    V_low:  0.59V ~ 0.84V

    V_high:  1.18V ~ 1.68V

    Frequency range:  1 ~ 2,000Hz

scientia non olet · About LEMON Manuals