LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Elantra Touring GLS, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery System >> Filler-Neck Assembly >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Filler-Neck Assembly: Removal

  1. Disconnect the fuel filler hose (A), the leveling hose (B) and the ventilation hose (C).
    Fig 1: Locating Fuel Filler Hose, Leveling Hose And Ventilation Hose
    G05363938Courtesy of HYUNDAI MOTOR CO.
  2. Open the fuel filler door and unfasten the filler-neck assembly mounting screws (A).
    Fig 2: Locating Filler-Neck Assembly Mounting Screws
    G06136233Courtesy of HYUNDAI MOTOR CO.
  3. Remove the rear-LH wheel, tire, and the inner wheel house.
  4. Remove the bracket mounting bolt (A) and remove the filler-neck assembly.
    Fig 3: Locating Bracket Mounting Bolt
    G06136234Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals