| DTC Strategy |
|
- Poor connection
- Open in harness
- HO2S (B2/S1)
- ECM
|
| General Enable Conditions |
- Target lambda = 1
- Battery voltage > 10.7V
- Upstream O2S Heater control On
|
| Case1 |
Enable Conditions |
- Downstream O2S voltage > 0.55V
|
| Threshold Value |
- 0.06V < Upstream O2S voltage < 0.4V
|
| Diagnostic Time |
|
| Case2 |
Enable Conditions |
- Downstream O2S voltage < 0.15V
- Dew point end check
|
| Threshold Value |
- 0.6V < Upstream O2S voltage < 1.08V
|
| Diagnostic Time |
|
| Case3 |
Enable Conditions |
- Time after dew point end detected > 10 sec
|
| Threshold Value |
- Counter of Δ 'Upstream O2S voltage' > 2V during 0.04sec after heater on->off > 5 times
|
| MIL On Condition |
|