LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Equus Ultimate >> Repair and Diagnosis >> Electrical >> Starter >> Button Engine Start System >> PDM (Power Distribution Module) >> Repair procedures >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the center fascia panel (A). (Refer to Body group-"CRASH PAD ")
    Fig 1: Identifying Center Fascia Panel
    G08831812Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the DIS head unit (A). (Refer to DIS (Driver Information System) )
    Fig 2: Identifying DIS Head Unit With Mounting Screws
    G08831813Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the crash pad lower panel (A).
    Fig 3: Identifying Crash Pad Lower Panel
    G08831814Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the power distribution module (A) after loosening bolt and nut.
Fig 4: Identifying Power Distribution Module
G08831815Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals