Ignition Coil: Service and Repair

Removal and Installation

Ignition coil

1. Disconnect the LH/RH ignition coil connectors (A).









NOTE:
When disconnecting the ignition coil connector, pull out the locking pin (A) and then pull out the connector while pressing the clip (B).




2. Remove the LH/RH ignition coils (A).

Tightening torque :
9.8 - 11.8N.m (1.0 - 1.2kgf.m, 7.2 - 8.7lb-ft)








3. Installation is reverse order of removal.