LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2012 >> Santa Fe SE, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - G3.5 DOHC >> Engine Control Module (ECM) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

NOTE: In the case of the vehicle equipped with immobilizer or button engine start system, perform "Key Teaching" procedure. (Refer to TEACHING PROCEDURES .)
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the ECM connector (A).
    Fig 1: Locating ECM Connector
    G06844863Courtesy of HYUNDAI MOTOR CO.
  3. Remove the air cleaner assembly. (Refer to INTAKE AND EXHAUST SYSTEM .)
  4. After removing the installation bolts (A), remove the ECM (B) from the bracket.
    Fig 2: Locating ECM And Bolts
    G06844864Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals